Modern Machine Tool Industries


Contact Us

Modern Machine Tool Industries

Plot No. EL-650, Industrial Area, Phase- 9, Mohali

Mobile : +91-9417132538, +91-8054151495, +91-9779557795

Call Us : 08042755646

3 D Pantograph Milling Machine (MTU 55)

Outstanding features of the Speedcut MTU-55 machines are the following clear, self explaining arrangement of all component parts, convenient location of worktable and copyholder permitting workpiece.

All controls grouped within easy reach of the operator. These features add up to great convenience in operation. The fixed arrangement of the pantograph support has been compensated for by the provision of three dimensional worktable movement.The massive box-section column cast integral with the amply dimensioned base plate has horizontal guide ways for a vertically adjustable knee which in turn carries the worktable. The crosswise adjustment of the worktable in combination with horizontal and vertical knee adjustment enable any desired table position to beobtained. Clamping area and work capacity of the worktable can be increased by attaching an auxilliary table. The master table or copyholder mounted on a longitudinally another adjustable knee can also be raised or lowered to suit special operating conditions. After the clamping bolts have been loosened the copy holder can be swivelled through 360°

The design of the Speed Cut Model MTU-55 Pantograph Engraving and profiting Millors is based on the use of a Three Dimensional pantograph. This principle made it possible to develop and introduce the first manually control copy-milling machines using tracer stylus which by tracing a template or master guies a milling in such a manner that accsurate reproductions are obtained. The pantograph mechanism which has been designed for fingertip control assures absolute accuracy of reproduction and an excellent surface finish requiring little, if any, retouching and thus reducing costs to a minimum.

The Model MTU-55 Miller which is equiped with a larger pantograph and a more generously dimensioned Cutter Spindle essembly is of particular advantage in the manufacture of moulds and dies of all kinds weighing upto 200 Kg. in view of the higher metal cutting capacity of the MTU-55 miller. This machine has been provided with a positively controlled tracer pin guiding mechanism for the rough milling of the heavier classes of work.

Special Extra Accessories
  • Rough Milling Attachment
  • Single Lip Tool Grinder Model MTG-I
  • Indexing Workholder
  • Electric Acting Attachment
  • Roll Engraving Attachment
  • Machine vice with swivel base width of 100 mm jaws
  • Rotary table 200 mm
  • Template set A to Z and 0 to 9 height of 20 mm (set of 107 numbers)
  • Machine lamp
  • Dove Tail Strip for Template
  • Auxiliary Table
Standard Accessories
  • Electric equipment suitable for 3 phase, 415 Volts, 50 cycles, A C supply.
  • Set of servicing Tools
  • Two clamps for Workholder
  • Two clamps for copyholder.
  • One spring collet for cutter spindle
  • One collet for tracing stylus.
  • One set of 6' numbers stylus.

» Specifications

Drive MotorCapacity1 H.P.
Cutter SpindleType of driveCord/Endless
No. of spindle speed14
Speed range400 .. 10000 rpm
Spindle Vertical travel
Taper of spindle hole
Minimumcollet capacity

8 mrn
PantographMax. Ratio1 : 1.5
Min. Ratio1 : 8
Work TableClamping area210 x 360 mm
(Max distance spindle nose to table top)375mm
Longitudinal traverses350mm
Cross traverse160mm
Copy Holder TableClamping area350 x 460 mm
(Max distance trace head to table top)300mm
Cross traverse160mm
Longitudinal traverse200mm
Vertical traverse250mm
Swivel range360o